11. EXPLANATION OF COMPONENTS 4. PREHEATING MONITOR This monitor lamp indicates the pre-heating time required when starting the engine at an ambient temperature below 5°C. The monitor lamp lights when the starting switch is turned to HEAT (0) position and flashes after about 36 seconds to show that the pre-heating is completed. (The monitor lamp will go off after about 16 seconds.) 5. SERVICE METER This meter shows the total operation hours of the machine. The service meter advances while the engine is running - even if the machine is not traveling. Set the periodic maintenance intervals using this display.
When the engine is running, the green pilot lamp at the top of the meters flashes to indicate that the meter is advancing. Meter will advance by 1 for each hour of operation regardless of the engine speed. I I AD104460 2-11