11. EXPLANATION OF COMPONENTS 11.9.2 COOLING OPERATION l Control switches AE104990 Ordinary cooling When control switches are used as shown, fresh cool air will be supplied into the cab. l Set switches @ and @ in the desired positions. l Set switches 0, 0, and @ in the positions shown. Ventilation and cooling When the air in the cab gets dirty, move Inside-Outside air changeover switch @ to the outside air (FRESH g) position to let outside air into the cab. The other switches are used in the same manner as in ordinary cooling. REMARK If ventilation cooling is used for many hours, the cooling effect may not be sufficient.
When the cab has been sufficiently ventilated, move Inside-Outside air selector switch @ back to the inside air (RECK q position. 2-32