Komatsu — 12.1 CHECK BEFORE STARTING ENGINE

12.1.3 ADJUST OPERATOR’S SEAT l Adjust the seat position at the beginning of each shift or l Adjust the seat so that the brake pedal can be depressed all the way with the operator’s back against the backrest. FORE-AFT ADJUSTMENT OF SEAT Pull up handle 0, set the seat to the desired position, then release the handle. Fore-aft adjustment: 160 mm (6.3 in) (17 stages) WEIGHT ADJUSTMENT OF SEAT Turn knob @ under the seat to match the weight adjustment scale with your own weight.

The weight can be adjusted within a range of 50 - 120 kg (110.3 - 117.8 lb) REMARK If you want to make the seat softer, turn the weight adjustment to a lower weight; if you want to make the seat harder, adjust to a higher weight. When operating on uneven surfaces, adjust the seat to a harder setting. AD063670 @ ADJUSTMENT RECLINING ANGLE NOTICE When reclining the seat back to the rear, check the space behind, and adjust to a suitable position. Pull lever 0, set the seatback to a position where it is easy to operate, then release the lever. 2-42