12.2.2 STARTING IN COLD WEATHER When starting in low temperatures, do as follows. NOTICE Do not keep the starting motor rotating continuously for more than 20 seconds. If the engine fails to start, repeat steps 2 and 3 after waiting for about 2 minutes. -3 d AD110800 1. Pull fuel control lever @ to a position midway between the low idling and full speed positions. Medium speed Engine stop I AE110810 2. Turn the key in starting switch @ to the HEAT position, checkthat preheating monitor @ lights up, and hold in this position. After approx. 36 seconds, preheating monitor @ will flash to indicate that preheating is completed. 3.
When preheating monitor @ flashes, turn the key in starting switch @ to the START position to start the engine. AE110820 w AE110830 4. When the engine starts, release the key in starting switch 0. The key will return automatically to the ON position. 2-47