Komatsu — 12.4 MOVING MACHINE

12.4 MOVING MACHINE I a WARNING I When moving machine, check that the area around the ma- chine is safe, and sound the horn before moving. Clear all personnel from the machine and the area. Clear all obstacles from the path of the machine. Use extreme care when reversing the machine. Note there is an blind spot behind the machine. When starting on slopes, always keep brake pedal @ de- pressed even after releasing brake lock lever 0. When starting up a steep slope, run the engine at full throttle, keep brake pedal @ depressed, then move gear shift lever 0 to the Fl or RI position.

When the machine starts to move (or the shoes slip), release brake pedal @ gradually and allow the machine to move off. L 1. Pull fuel control lever @ to increase engine speed. 2. Set safety lock @ for blade control lever @ and lever @ to the FREE position. ripper control I AE110960 AE110900 3. Operate blade control lever @ and ripper control lever @to the RAISE position, raise the blade and ripper 40 - 50 cm (I 5.8 - 19.7 in) from the ground. AE110910 2-49