12.14 CHECK AFTER STOPPING ENGINE 1. Walk around the machine and check the work equipment, paint- work, and undercarriage, and check also for leakage of oil or water. If any abnormalities are found, repair them. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud stuck to the undercarriage. 12.15 LOCKING To prevent vandalism, there are locks at the following places. Places that can be locked with the starting switch key.
l Cab door opener @ (machines equipped with cab) l Cap with lock @ l Radiator cap l Fuel tank cap I t-2 /y M AE111240 l Hydraulic oil tank cap 0 Power train oil filler cap Commercially available locks can be fitted to the following places. l Right and left engine side cover @ l Battery and air conditioner filter inspection cover @ l Inspection cover for fuel tank drain valve @ l Tool box @ I AE111250 2-63