87 PERIODIC SERVICE B Checking Seat Belt and ROPS 1. Always check condition of seat belt and ROPS attaching hardware before operating tractor. 2. Replace if damaged. EVERY 50 HOURS B Lubricating Grease Fittings Apply a small amount of multipurpose grease to the following points every 50 hours: If you operated the machine in extremely wet and muddy conditions, lubricate grease fittings more often.
[2WD] (1) Grease fitting (Front axle support) (2) Breather plug (1) Grease fitting (Knuckle shaft)[RH, LH] [L4240, L4740, L5040, L5240, L5740] (1) Grease fitting (Lift cylinder) (1) Grease fitting (Front wheel case support)[RH, LH] When apply a grease to forward front axle support, remove the breather plug and apply a grease until grease overflows from breather plug port. After greasing reinstall the breather plug. (1) Grease fitting (Top link) (2) Grease fitting (Lifting rod) [RH] (3) Grease fitting (Top link bracket)