SPECIFICATION TABLE [HST Type] [ROPS and CAB models] SPECIFICATIONS 1 SPECIFICATIONS Model L3240 L3540 L4240 L5240 L5740 4WD Engine Model D1703-M-E2- HST D1803-M-E2- HST V2203-M-E2- HST V2403-M-TE2- HST Type Indirect injection vertical, water-cooled, 4-cycle diesel Number of cylinders 3 4 Total displacement L 1.647 1.826 2.197 2.434 Bore and stroke mm 87 x 92.4 87 x 102.4 87 x 92.4 87 x 102.4 Net power* kW (PS) 23.9 (32.5) 26.1 (35.5) 31.3 (42.6) 38.8 (52.8) 42.5 (57.8) PTO power* (factory observed) kW (PS)/ rpm 18.7 (25.4)/ 2700 20.9 (28.4)/ 2700 26.1 (35.5)/ 2700 33.6 (45.7)/ 2600 37.3 (50.7)/ 2700 Maximum torque N-m (kgf-m) 101.7 (10.4) 112.8 (11.5) 139.7 (14.2) 180.6 (18.4) Battery capacity 12V, RC:
123min, CCA: 490A 12V, RC: 133 min, CCA: 582A Fuel Diesel fuel No.1 [below -10 ] Diesel fuel No.2 [above -10 ] Capacities Fuel tank L 44 50 54 Engine crankcase (with filter) L 5.7 6.7 8.2 9.4 Engine coolant L 6.0 7.5 8.2 Transmission case L 42 43 45 Dimensions Overall length (without 3p) mm 3120 3285 3410 Overall width (min. tread) mm 1520 1665 1570 Overall height with ROPS mm 2385 2405 2490 with CAB mm --- 2295 2405 Wheel base mm 1805 1895 1915 Min. ground clearance mm 350 375 400 Tread Front mm 1150 1145 1340 Rear mm 1200, 1300, 1385, 1480 1285, 1435, 1530 1225, 1325, 1425, 1525 Weight with ROPS kg 1540 1665 1745 with CAB kg --- 1815 1920