29 OPERATING THE TRACTOR B Adjustment of Foldable ROPS A Adjust free fall of the ROPS upper frame regularly. A If you feel less friction in folding the ROPS, remove the cotter pin (1), tighten the nut (2) until you feel the right friction in the movement and then replace the cotter pin. STARTING 1. Adjusting the operator's position. B Operator's Seat To avoid personal injury: A Make adjustments to the seat only while the tractor is stopped. A Make sure that the seat is completely secured after each adjustment. A Do not allow any person other than the operator to ride on the tractor.
(1) Cotter pin (2) Nut (1) Travel adjust lever (2) Suspension adjust knob (3) Backrest tilt adjust lever (4) Arm rest (A) To decrease tension (B) To increase tension C Travel adjustment Pull the travel adjust lever and slide the seat backward or forward, as required. The seat will lock in position when the lever is released. A The operator's seat base has a slope. When lifting the lever, be careful not to allow the seat to slide down forward. C Suspension adjustment knob Turn the suspension adjust knob to achieve the optimum suspension setting. C Tilt adjustment Pull the backrest tilt adjust lever and move the backrest to the desired angle.
A After adjusting the operator's seat, be sure to check to see that the seat is properly locked.