Kubota L3240, L3540, L3940, L4240, L4740, L5040, L5240, L5740 — HST Mode Select Switch

37 OPERATING THE TRACTOR B HST Mode Select Switch Every time this switch is pushed, "MANUAL", "STALL GUARD" and "AUTO H-DS/STALL GUARD" are selected consecutively. Choose the best mode according to the type of job or your operating style. The selected mode is displayed on the indicator on the meter panel. C STALL GUARD 1. Push the HST mode select switch until the "STALL GUARD" indicator lights up on the meter panel. 2. If the tractor gets overloaded and the engine rpm drops, the tractor automatically slows down in response to the load, which prevents an engine stall. HST GST MT C AUTO H-DS/STALL GUARD 1.

Push the HST mode select switch until the "STALL GUARD" and "AUTO H-DS" indicators light up on the meter panel. 2. Set the H-DS lever to the "UP" (Hi) position. Make sure the " " (Hi) lamp lights up on the meter panel. 3. If the tractor gets overloaded and the engine rpm drops, the tractor automatically slows down to the (Lo) low speed range. In this case, the " " (Hi) lamp goes out and the " " (Lo) lamp lights up instead. 4. When the engine rpm has come up again, the tractor automatically speeds up from the (Lo) low speed range to the (Hi) high speed range.

(The tractor speed increases to match the speed control pedal.) If the load is rather heavy and the engine rpm drops further, "STALL GUARD" will still prevent engine stall. A When the H-DS lever is set at the "Lo" position, the "AUTO H-DS" system does not work. (If the " " (Lo) lamp stays up and the "AUTO H-DS" lamp is flashing, set the H-DS lever to the "Hi" position.) A Even in the "AUTO H-DS/STALL GUARD" mode, the Hi-Lo speed change can be made with this lever. Return the lever to the "Hi" position when there is no more need to slow down. C MANUAL Push the HST mode select switch until the "STALL GUARD" and "AUTO H-DS" indicators go out on the meter panel. This provides for manual mode.

In this mode, any automatic control in response to the load does not activate. (1) HST mode select switch (A) " " (Hi) (B) " " (Lo) (C) "STALL GUARD" (D) "AUTO H-DS"