47 OPERATING THE TRACTOR 6. Selecting the Travel Speed. HST GST MT [Manual Transmission Type] (1) Synchro-shuttle shift lever (2) Main gear shift lever (3) Range gear shift lever (Hi-Lo) (4) Front wheel drive lever (5) Creep gear shift lever (if equipped) (A) "FORWARD" (B) "REVERSE" (N) "NEUTRAL POSITION" "HIGH" "LOW" B Main Gear Shift Lever The main gear shift is fully synchronized to shift without stopping. B Synchro-Shuttle Shift Lever Raise up and shift the shuttle shift lever forward to obtain forward speeds and shift back to obtain reverse speeds. This shifting requires clutch operation. A The main gear shift may be shifted between speeds on-the-go, but clutch must be depressed.
B Range Gear Shift Lever (Hi-Lo) The range gear shift can only be shifted when tractor is completely stopped and clutch is depressed. A The synchro-shuttle shift lever may be shifted while the tractor is moving slowly and the clutch is depressed, but sudden gear shifting may cause transmission damage. A When you stand up from the seat with the shuttle lever at "FORWARD" or "BACKWARD", the engine will stop regardless of whether the tractor is moving or not. This is because the tractor is equipped with Operator Presence Control system (OPC). A To avoid transmission damage, depress clutch pedal and stop tractor before shifting between ranges.