OPERATING THE TRACTOR 50 STOPPING INTELLIPANEL (TM) B Stopping 1. Slow down the engine. 2. Step on the clutch and brake pedal. 3. After the tractor has stopped, disengage the PTO, lower the implement to the ground, shift the transmission to neutral, release the clutch pedal, and set the parking brake. B Changing Display Mode 1. Each time the display mode button is pressed, the IntelliPanel(TM) display mode changes from 1 thru 5. Select the display mode appropriate for the work in question. 2. When the key switch is set to "ON", the IntelliPanel(TM) will return to the last display mode used. 3. If the display is in any mode other than the traveling speed mode.
Press the travel speed button, and the display switches to the traveling speed mode. To get back to the original display mode, use the display mode button. (1) IntelliPanel(TM) display (2) Display mode button (3) Travel speed button