57 PTO PTO PTO OPERATION To avoid personal injury: A Disengage PTO, stop engine, and allow all rotating components to come to a complete stop before connecting, disconnecting, adjusting, or cleaning any PTO driven equipment. B PTO Clutch Control Lever 1. The tractor has a 540 rpm speed position. 2. The PTO clutch control lever engages or disengages the PTO clutch which gives the PTO independent control. Shift the lever to "ON" to engage the PTO clutch. Shift the lever to "OFF" to disengage the PTO clutch. A Tractor engine will not start if the PTO clutch control lever is in the engaged "ON" position. A When the clutch pedal is depressed, the PTO disengages.
[HST Type] A When the clutch pedal is depressed, the PTO engages. [GST, Manual Transmission Type] (1) PTO clutch control lever "ON" "OFF" A To avoid shock loads to the PTO, reduce engine speed when engaging the PTO, then open the throttle to the recommended speed. A To avoid damage of PTO clutch and implement, shift the PTO clutch control lever slowly, when engaging the PTO clutch. Do not keep the PTO clutch control lever half way. Proper warm up is strongly recommended in cold weather. Do not continuously shift the PTO clutch control lever.
Model Engine Speed rpm Shaft PTO Speed rpm GST Type Manual Transmission Type 2550 6-Spline 540 HST Type L3240 L3540 2685 L3940 L4240 L4740 2640 L5240 L5740 2590