59 PTO B Stationary PTO To park the tractor and use the PTO system (for chipper or pump, for example), start the PTO system in the following steps. 1. Apply the parking brakes and place blocks at the tires. 2. Make sure the shift levers are at NEUTRAL, and start the engine. 3. Tilt the operator's seat forward. 4. Set the PTO clutch control lever to engage"ON". B IntelliPanel (TM) Message 1. The PTO rpm can be checked in the display. (See "INTELLIPANEL(TM)" in "OPERATING THE TRACTOR" section.) 2. When the PTO system gets engaged (ON), the indicator lights up. (1)Display (2)Rear PTO indicator (1) Seat (2) PTO clutch control lever "ON" "OFF" A Rear PTO "ON" 5.
Set the engine speed to provide recommended rear PTO speed. A If the PTO system is engaged and you stand up from the seat or the seat is not tilted forward, the engine stops automatically after standing up. A Mid-PTO "ON"