Kubota L3240, L3540, L3940, L4240, L4740, L5040, L5240, L5740 — Front Wheels - with two wheel drive

TIRES, WHEELS AND BALLAST 72 WHEEL ADJUSTMENT B Front Wheels (with two wheel drive) Front tread width can be adjusted as shown with the standard equipped tires. To avoid personal injury: A When working on slopes or when working with trailer, set the wheel tread as wide as practical for maximum stability. A Support tractor securely on stands before removing a wheel. A Do not work under any hydraulically supported devices. They can settle, suddenly leak down, or be accidentally lowered. If necessary to work under tractor or any machine elements for servicing or adjustment, securely support them with stands or suitable blocking beforehand.

A Never operate tractor with a loose rim, wheel, or axle. To change the tread width 1. Remove the front axle mounting bolts and the tie-rod mounting bolts. 2. Move the front axles (right and left) to the desired position, and tighten the bolts. 3. Adjust the toe-in: [ 2 to 8mm (0.1 to 0.3 in.) ] (See "Adjusting Toe-in" in "EVERY 200 HOURS" in "PERIODIC SERVICE" section.) (1) Front axle mounting bolt 124 to 147 N-m (12.6 to 15.0 kgf-m)(91.5 to 108.4 ft-lbs) (2) Tie-rod mounting bolt 61 to 71 N-m (6.2 to 7.2 kgf-m)(44.8 to 52.1 ft-lbs) (3) Tie rod clamp A The front tread width for the front loader application on 2WD models should not be greater than 1310mm (51.6 in.) for L3240.

Models Farm L3240 6.00-16 1210 mm (47.6 in.) 1310 mm(51.6 in.) 1410 mm (55.5 in.) 1510 mm (59.4 in.) L3240 7.5L-15 1280 mm (50.4 in.) 1380 mm (54.3 in.) 1480 mm(58.3 in.) 1580 mm(62.2 in.) Turf L3240 27 x 10.50-15 1310 mm (51.6 in.) 1410 mm (55.5 in.) 1510 mm(59.4 in.) 1610 mm (63.4 in.) L3240 29 x 12.50-15 1315 mm (51.8 in.) 1415 mm (55.7 in.) 1515 mm (59.6 in.) 1615 mm (63.6 in.)