TIRES, WHEELS AND BALLAST 76 BALLAST To avoid personal injury: A Additional ballast will be needed for transporting heavy implements. When the implement is raised, drive slowly over rough ground, regardless of how much ballast is used. A Do not fill the front wheels with liquid to maintain steering control. B Front Ballast Add weights if needed for stability (2WD, 4WD models) and improve traction (4WD model). Heavy pulling and heavy rear mounted implements tend to lift front wheels. Add enough ballast to maintain steering control and prevent tip over. Remove weight when no longer needed. C Front End Weights (option) The front end weights can be attached to the bumper.
See your implement operator's manual for required number of weights or consult your local KUBOTA Dealer to use. A Always attach wheels as shown in the drawings. A If not attached as illustrated, transmission parts may be damaged. A When re-fitting or adjusting a wheel, tighten the bolts to the following torques then recheck after driving the tractor 200 m (200 yards) and 10 times of shuttle movement by 5 m (5 yards), and thereafter according to service interval. (See "MAINTENANCE" section.) (1) Front end weights (2) Bumper A Do not overload tires. A Add no more weight than indicated in chart. A The front end weights can be attached to the bumper (option on 4WD models - North America only).
(1) 215 N-m (22 kgf-m, 160 ft-lbs) Models L4240, L4740, L5040, L5240, L5740 610R470 Turf 1515 mm (59.6 in.) L3240, L3540 355/80-D20 Turf 1270 mm (50.0 in.) L3940 355/80-D20 Turf 1290 mm (50.8 in.) L3240, L3540 41/18LL x 16.1 Turf 1420 mm (55.9 in.) L3940, L4240, L4740, L5040, L5240, L5740 41/18LL x 16.1 Turf 1440 mm (56.7 in.) L3240, L3540 44 x 18-20 Turf 1400 mm (55.1 in.) L3940, L4240, L4740, L5040, L5240, L5740 44 x 18-20 Turf 1415 mm (55.7 in.) Maximum weight 25 kg x 7 pieces (386 lbs.)