SEBU9064 65 Maintenance Recommendations Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace The primary air cleaner element can be used up to six times if the element is properly cleaned and properly inspected. The primary air cleaner element should be replaced at least one time per year. This replacement should be performed regardless of the number of cleanings. Cleaning the Primary Air Cleaner Elements Refer to the OEM information in order to determine the number of times that the primary filter element can be cleaned. When the primary air cleaner element is cleaned, check for rips or tears in the filter material.
The primary air cleaner element should be replaced at least one time per year. This replacement should be performed regardless of the number of cleanings. The secondary air cleaner element is not serviceable. Refer to the OEM information for instructions in order to replace the secondary air cleaner element. When the engine is operating in environments that are dusty or dirty, air cleaner elements may require more frequent replacement. NOTICE Do not tap or strike the air cleaner element. Do not wash the primary air cleaner element. Use low pressure (207 kPa; 30 psi maximum) pres- surized air or vacuum cleaning to clean the primary air cleaner element.
Take extreme care in order to avoid damage to the air cleaner elements. Do not use air cleaner elements that have damaged pleats, gaskets, or seals. Refer to the OEM information in order to determine the number of times that the primary air cleaner element can be cleaned. Do not clean the primary air filter element more than three times. The primary air cleaner element must be replaced at least one time per year. Illustration 34 g00736431 (1) Cover (2) Primary air cleaner element (3) Secondary air cleaner element (4) Air inlet Cleaning the air filter element will not extend the life of the air filter element. 1. Remove the cover. Remove the primary air cleaner element.
Visually inspect the primary air cleaner element before cleaning. Inspect air cleaner elements for damage to the pleats, the seals, the gaskets, and the outer cover. Discard any damaged air cleaner element. 2. The secondary air cleaner element should be removed and discarded for every three cleanings of the primary air cleaner element. Note: Refer to “Cleaning the Primary Air Cleaner Elements”. Two methods may be used in order to clean the primary air cleaner element: 3. Cover the air inlet with tape in order to keep out dirt. pressurized air Vacuum cleaning 4. Clean the inside of the air cleaner cover and body with a clean, dry cloth. Pressurized Air 5. Remove the tape from the air inlet.
Install the secondary air cleaner element. Install a primary air cleaner element that is new or cleaned. Personal injury can result from air pressure. 6. Install the air cleaner cover. Personal injury can result without following prop- er procedure. When using pressure air, wear a protective face shield and protective clothing. 7. Reset the air cleaner service indicator. Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning purposes.