Inner dia. of clutch pedal bushing (installed) .... 1.0030 to 1.0075 in, 25.48 to 25.59 mm 50 Power Train 5-16 Engine Clutches and Clutch Linkage Model 2120 Tractor TM-1252 (Dec-70) Dia, of hollow PTO drive shaft seat for roller bearing .......... . ...... 1.9651 to 1.9657 in. 49.913 to 49.929 mm SPECIFICATIONS Dia. of drive shaft seat for pilot bearing ..... ... 0.5895 to 0.5901 in, 14.973 to 14.989 mm CLUTCH LINKAGE Dimensions of New Parts Wear Tolerance Dia. of needle bearing bore of clutch housing ..................... 2,1245 to 2,1255 in. 53.962 to 53.988 mm Clearance between oil seal face and clutch housing face ........ 1.3 in.
33.3 mm Bearing pin of clutch pedal protrudes from clutch housing by ......... . 2.5 in. 63.5 mm Dia. of clutch pedal bearing pin ............ 0.9975 to 0.9985 in. 25.336 to 25.362 mm Clearance between bushing face and clutch housing face ....... ....... ....... ......... 2.8 in. 71.5 mm Dia. of clutch shaft in clutch housing ........... 1.122 to 1.128 in. 28.50 to 28.66 mm Inner dia. of clutch shaft bushing (installed) ........ 1.128 to 1.132 in. 28.65 to 28.75 mm Thickness of a new engine clutch disk ........... 0.366 to 0.390 in. 0.238 in. 9.3 to 9.9 mm 6.3 mm Thickness of a new PTO clutch disk ............ 0.303 to 0.327 in. 0.185 in.
7.7 to 8.3 mm 4.7 mm ENGINE DUAL-STAGE CLUTCH Maximum permissible wear or roughness of pressure plate, base plate and flywheel . . 0.006 in. 0.15 mm Printed in Germany