John Deere 2120 Tractor — tm4252

Model 2120 Tractor TM-4252 (Dec-70) Hydraulic System 70 General Information, Diagnosing Malfunctions, Pressure Tests 5-3 v-JUlrTTU r 33 Fig.

2 Complete Hydraulic System (Tractor With HIGH-LOW Shift Unit, Oil Cooler, Independent PTO and Power Steering) 1 Selective control valves 2 To quick couplers 3 Rockshaft 4 Lube oil to final drives 5 Transmission oil cup 6 Transmission drive shaft 7 Countershaft 8 Differential drive shaft 9 Transmission oil pump 10 Suction screen 11 By-pass valve of 13 Bleed line 14 Hydraulic oil reservoir 15 Check valve 16 Hydraulic pump 17 Leak-off and bleed line 18 Main brake cylinder 19 Power steering 20 Relief valve 21 Oil cooler 22 Flow control valve of 24 To disk brake of HIGH-LOW unit 25 Control valve of independent PTO 26 To PTO brake 27 Pressure regulating valve 28 To PTO clutch 29 To disk clutch of HIGH-LOW unit 30 Transmission shift cover 31 To HIGH-LOW unit (lubrication) 32 Pressure oil (2050 to 2280 psi transmisaon oil filter 12 Transmission oil filter power steering 23 HIGH-LOW control valve assy.

= 144 to 160 kg/cm2) 33 Pressure oil (100 psi = 7 kg/cm2)* 34 Pressure oil (50 psi - 3.5 kg/cm2) 35 Pressure-free oil OPERATION Transmission oil pump 9 (see figs. 1 and 2) sucks oil from the main oil reservoir (transmission case) through suction screen 10 and pushes it through transmission oil filter 12. On tractors not equipped with HIGH-LOW unit or independent PTO, oil passes from transmission oil filter directly to the hydraulic pump. These machines have a check valve 19 (fig. 1) installed in the inlet line to the hydraulic pump, ensuring that when the engine is stopped or engine clutch is disengaged (transmission oil pump is then not operating), oil does not flow back.

On tractors equipped with HIGH-LOW shift unit or in¬ dependent PTO the operation of the check valve is carried out by the pressure regulating valve 27 located in the transmission shift cover 30 (fig. 2). The transmission oil filter 12 is provided with a by-pass valve 11 located between inlet and outlet of the filter. This by-pass valve causes the oil sucked in by the oil pump to be returned to the main oil reservoir if a specified pressure differential is reached between inlet and outlet of transmission oil filter due to filter restriction (see Specifi¬ cations). * On tractors equipped with independent PTO 150 psi (10.5 kg/ cm). Printed in Germany