Kubota Operator Manual (EN)

back cover with prop 65 new style1.pdf

May 2009 Introduction REV A Important Serial Number Information Read, understand and obey the safety rules and operating instructions in the appropriate Operator's Manual on your machine before attempting any maintenance procedure. TEREX Corporation offers the following manuals for these models: Title Part No. Basic mechanical, hydraulic and electrical skills are required to perform most procedures. However, several procedures require specialized skills, tools, lifting equipment and a suitable workshop. In these instances, we strongly recommend that maintenance and repair be performed at an authorized TEREX dealer service center.

TEREX RL4000/TML-4000 ................................116692 Operator's Manual First Edition TEREX RL4000/TML-4000 ................................116694 Service Manual First Edition TEREX RL4000/TML-4000 ................................116693 Part's Manual First Edition Technical Publications Perkins Operations Manual ................................131661 TEREX Corporation has endeavored to deliver the highest degree of accuracy possible. However, continuous improvement of our products is a TEREX policy. Therefore, product specifications are subject to change without notice.

Kubota Engine Manual.......................................893020 Axis Manual ........................................................116117 Marathon Manual ...............................................116188 Readers are encouraged to notify TEREX of errors and send in suggestions for improvement. All communications will be carefully considered for future printings of this and all other manuals. Contact Us: Copyright © 2009 by TEREX Corporation www.TEREX.com 116693 Rev A May 2009 First Edition, First Printing "TEREX" is a registered trademark of TEREX Corporation in the USA and many other countries. "Super Quiet" is a trademark of TEREX Corporation.

Printed on recycled paper Printed in U.S.A. ii RL4000 • TML-4000 Part No. 116693

Стр. 2

back cover with prop 65 new style1.pdf

May 2009 How to Read Your Serial Number REV A Serial Number Legend The serial number plate on your RL4000 or TML-4000 is located on the cabinet next to the light tower mast. Part No. 116693 RL4000 • TML-4000 iii

Стр. 3

back cover with prop 65 new style1.pdf

May 2009 Section 1 • Safety Rules Safety Rules REV A Danger Failure to obey the instructions and safety rules in this manual and the appropriate Operator's Manual on your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed. Do Not Perform Maintenance Unless: You are trained and qualified to perform maintenance on this machine. You read, understand and obey: - manufacturer’s instructions and safety rules - employer’s safety rules and worksite regulations - applicable governmental regulations You have the appropriate tools, lifting equipment and a suitable workshop.

Part No. 116693 RL4000 • TML-4000 v

Стр. 5

back cover with prop 65 new style1.pdf

Section 1 • Safety Rules May 2009 REV A SAFETY RULES Personal Safety Be sure to wear protective eye wear and other protective clothing if the situation warrants it. Any person working on or around a machine must be aware of all known safety hazards. Personal safety and the continued safe operation of the machine should be your top priority. Be aware of potential crushing hazards such as moving parts, free swinging or unsecured components when lifting or placing loads. Always wear approved steel-toed shoes. Read each procedure thoroughly. This manual and the decals on the machine, use signal words to identify the following:

Workplace Safety Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Be sure to keep sparks, flames and lighted tobacco away from flammable and combustible materials like battery gases and engine fuels. Always have an approved fire extinguisher within easy reach. Red—used to indicate the presence of an imminently hazardous situation which, if not avoided, will result in death or serious injury. Be sure that all tools and working areas are properly maintained and ready for use. Keep work surfaces clean and free of debris that could get into machine components and cause damage.

Orange—used to indicate the presence of a potentially hazardous situation which, if not avoided, could result in death or serious injury. Be sure that your workshop or work area is properly ventilated and well lit. Yellow with safety alert symbol— used to indicate the presence of a potentially hazardous situation which, if not avoided, may cause minor or moderate injury. Be sure any forklift, overhead crane or other lifting or supporting device is fully capable of supporting and stabilizing the weight to be lifted. Use only chains or straps that are in good condition and of ample capacity.

Yellow without safety alert symbol—used to indicate the presence of a potentially hazardous situation which, if not avoided, may result in property damage. Be sure that fasteners intended for one time use (i.e., cotter pins and self-locking nuts) are not reused. These components may fail if they are used a second time. Green—used to indicate operation or maintenance information. Be sure to properly dispose of old oil or other fluids. Use an approved container. Please be environmentally safe . vi RL4000 • TML-4000 Part No. 116693

Стр. 6