Major Parameters A M N O C J K L B D G E F H 20-10 MAJOR PARAMETERS Contents HG190 Engine model Cummins 6CTA8.3-C190 Rated power 142kW (190 hp) Max torque 860Nm/1,400rpm Power Train Transmission Power shift (ZF Technology), 6 Forward / 3Reverse Gears Max speed 49.2/30.0 km/h Service brake Foot operated, hydraulically actuated on four tandem wheels Parking brake flexible shaft control actuated inner-expanding drum brake Hydraulic Pump flow 99 L/min Max system pressure 17.5 Mpa Moldboard Moldboard Dimension 4,268 x 580 x 18 mm Arc radius 329 mm Cutting edge (width/thickness) 152 / 16 mm Blade Range Circle center shift (right/left) 525 / 530 mm Moldboard side shift (right/left) 965 / 965 mm Max shoulder reach outside tires (right/left) 2,341 / 2,346 mm Max lift above ground 450 mm Operating Spec.
Turning radius 7.3 m Steering range Left / Right 49° Articulation angle Left / Right 26° Operation Weight (Ton) 15.6 Item Description H G190 Remark A Height to Top of Non-ROPS Cabin 3,420 mm Height to Top of ROPS Frame 3,604 mm B Center of Front Axle to counterweight 963 mm C Ground Clearance to Center Front Axle 714 mm D Length of Front Axle to Moldboard 2,600 mm E Length of Front Axle to Mid Tandem 6,100 mm F Length of Front Tire to Rear of Machine 8,353 mm G Length of Between Tandem Axles 1,535 mm H Length of Between Counterweight to Ripper 8,353 mm J Width of Tire Center Lines 2,120 mm K Width of Outside Tires 2,565 mm L Width of Moldboard 4,268 mm M Height to Exhaust Stack 2,846 mm N Height to Top of Cylinders 2,908 mm O Ground Clearance to Trans.
Case 339 mm