MAINTENANCE SERVICE ITEM PAGE ! Lift cylinder pin (4 places) 3-51 ! Lift arm pivot pin (2 places) 3-51 ! Tilt lever pin (1 place) 3-51 ! Steering cylinder pin (4 places) 3-51 Replace fuel filters 3-52 Replace transmission oil filter element 3-54 Lubricate the following: 3-55 ! Center hinge pin (2 places) 3-55 Change oil in transmission case, clean strainer 3-56 Clean transmission case breather 3-57 Lubricate the following: 3-58 ! Front drive shaft (1 place) 3-58 ! Drive shaft center support (1 place) 3-58 ! Center drive shaft (2 places) 3-58 !
Rear drive shaft (2 places) 3-58 Change oil in hydraulic tank, replace hydraulic filter element 3-59 Adjust engine valve lash clearance (After first 1000 hours only thereafter every 2000 hour intervals) 3-60 Check fan belt tension 3-61 Check fan belt tensioner bearing and fan hub bearing, and inspect fan belt 3-61 Cooling system, replace coolant and flush the system 3-62 Replace hydraulic tank breather element 3-65 Change axle oil 3-65 Check brake disc wear 3-66 The interval of 2000 hours for changing the axle oil is for standard operations. If the brakes are used frequently or if the brakes make a noise then change the oil in shorter intervals.
3-27 EVERY 250 HOURS SERVICE (continued) EVERY 500 HOURS SERVICE EVERY 1000 HOURS SERVICE EVERY 2000 HOURS SERVICE