OPERATION OPERATION AUTOMATIC PREHEATING 1. Turn glow switch (3) to the AUTO position. When it is turned to the AUTO position, preheating is automatically carried out according to the ambient tem- perature. Lamp (4) lights up during the preheating opera- tion. When the preheating is completed, lamp (4) will go out. 2. When the preheating is completed, turn the key in start- ing switch (2) to the START position to start the engine. 3. When the engine starts, release the key in starting switch (2). The key will return automatically to the ON position. 4. Continue idling for 10 seconds after the engine starts. During this time, do not operate the control levers or fuel control lever. 5.
After starting the engine, return glow switch (3) to the OFF position. REMARK If the engine can not start after automatic preheating, start it using manual preheating. 3-63