OPERATION OPERATION 5. After warm-up has completed, check gauges and caution lamps for proper operation. If any abnormality is found, repair it. Continue to run the engine at low load until engine water temperature gauge (2) falls within the white range (Moni- tor Panel Spec.) or green range (Gauge Panel Spec.). 6. Check that there is no abnormal exhaust gas color, noise, or vibretion. If any abnormality is found, repair it. STOPPING ENGINE NOTICE If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine apart from an emergency.
In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradu- ally, then stop it. 3-70