~topping l D D 1 1. Reduce machine speed by moving accelerator lever back back. 2. Depress clutch pedal and, at the same time, - 3. Depress brake pedal gently to stop your machine. 4. Move transmission control lever to NEUTRAL, and release clutch pedal. Stopping [DPS] 1. Reduce machine speed by moving accelerator lever back. 2. Move transmission control lever to NEUTRAL 3. Depress brake pedal gently to stop your machine. WARNING WARNING When leaving your machine unattended, be sure to: When parking your machine on a slope, position it at right angles to the slope - chock tracks - and penetrate blade into ground. 1. Lower blade or bucket to ground.
Lock blade control lever with safety lock lever on machine equipped with power angling-tilt control. 2. Make sure transmission control lever is in NEUTRAL. On DPS machine, lock transmission control with lock-unlock lever. 3. Lock brake pedal. 4. Shut off engine, and remove key from starter switch. 5. Turn OFF battery switch.