Special Conditions Operating in cold weather • Lubricants and diesel fuels • Coolant • Engine cooling system of a new machine shipped from factory is filled with coolant containing 30% of Mitsubishi Long Life Coolant (antifreeze containing rust inhibitor). • Long Life Coolant is highly flam- mable; keep it away from open flame. • Starting in cold weather • Long Life Coolant is effective for sub-zero temperatures down to -ISoC (SOF). • When using Long Life Coolant at temperatures below - IS OC (SOF), rely on the following chart for correct percentage. • Use lube oils of lower viscosity. See the chart, RECOMMENDED FUELS AND LUBRICATNS, in page 59. • Use diesel fuels having lower pour point.
See the chart, RECOM- MENDED FUELS AND LUBru- CANTS, in page 59. Turn starter switch to HEAT posi- tion to heat engine thoroughly. After starting engine, warm it up thoroughly. • Battery • Change Long Life Coolant every 2 years. When changing, flush cool- ing system thoroughly. After operating in cold weather • Clean snow or mud from around your machine to prevent freeZing. Park on dry concrete floor, planks or logs to avoid freezing. • Add distilled water to battery be- fore starting engine for the day's run. • Use Long Life Coolant with soft water. • Always keep battery fully charged so that electrolyte specific gravity is higher than 1.28 as corrected to 20°C (68°F).
~ WARNING· • Wipe dirt and moisture from piston rods of hydraulic cylinders. • Long Life Coolant is poisonous; be careful not to drink it. If you drip it on your skin, flush it o,ff at • Drain water and sediment from fuel tank. Starting temperature °c (OF) -20 (-4) -30 (-22) -40 (-40) Percentage of Long Life Coolant 35 45 55