Operation ting up for and cruising in shallow water. Otherwise severe damage from overheat- ing can result. UP DN DN EMU28183 Procedure for power trim and tilt / power tilt models 1. Place the gear shift lever in neutral. ZMU01936 DN 2. Slightly tilt the outboard motor up to the desired position using the power trim / tilt switch. ZMU04147 EMU28060 Cruising in shallow water The outboard motor can be tilted up partially to allow operation in shallow water. UP UP EMU28090 Power trim and tilt models / power tilt models The outboard motor can be tilted up partially to allow operation in shallow water.
DN EWM00660 ZMU01935 G Place the gear shift in neutral before setting up for shallow water cruising. WARNING G Return the outboard motor to its normal position as soon as the boat is back in deeper water. UP ECM00260 CAUTION: Do not tilt the outboard motor up so that the cooling water inlet on the lower unit is above the surface of the water when set- ZMU04146 3. To return the outboard motor to the nor- 38