Maintenance the main switch to “ ” (off) and re- move the key, and remove the lanyard from the engine stop switch. Turn off the battery cut-off switch if your boat has one. G Do not use your hand to hold the pro- peller when loosening or tightening the propeller nut. Put a wood block be- tween the anti-cavitation plate and the propeller to prevent the propeller from turning. ZMU04156 7. Activate the trim-up switch until the tilt rod is fully extended. Unlock the tilt sup- port lever. ZMU01896 8. Tilt the outboard motor down. Check that the tilt rod and trim rods operate smoothly. NOTE: Consult your Yamaha dealer if any operation is abnormal.
EMU29171 Checking propeller ZMU01897 EWM00321 WARNING Checkpoints You could be seriously injured if the en- gine accidentally starts when you are near the propeller. G Check each of the propeller blades for wear, erosion from cavitation or ventila- tion, or other damage. G Check the propeller shaft for damage. G Before inspecting, removing, or install- ing the propeller, remove the spark plug caps from the spark plugs. Also, place the shift control in neutral, turn G Check the splines / shear pin for wear or damage. G Check for fish line tangled around the pro- peller shaft. 53 ZMU02635