Yamaha Motor Corporation, USA 115D — Checking Battery (For Electric Start Models)

Maintenance ommended level when necessary. Top up only with distilled water (or pure de- ionized water suitable to use in batter- ies). G Reversal of the battery cables will dam- age the electrical parts. ing on the battery. G Connect the red battery cable first when installing the battery and discon- nect the black battery cable first when removing it. Otherwise, the electrical parts can be damaged. G The electrical contacts of the battery and cables must be clean and properly connected, or the battery will not start the engine. Connect the red battery cable to the POSI- TIVE (+) terminal first. Then connect the black battery cable to the NEGATIVE (-) ter- minal. 2.

Always keep the battery in a good state of charge. Installing a voltmeter will help you monitor your battery. If you will not use the boat for a month or more, re- move the battery from the boat and store it in a cool, dark place. Completely re- charge the battery before using it. 3. If the battery will be stored for longer than a month, check the specific gravity of the fluid at least once a month and re- charge the battery when it is low. NOTE: Consult a Yamaha dealer when charging or re-charging batteries. 1. Red cable 2. Black cable 3. Battery EMU29331 Connecting the battery EWM00570 EMU29370 Disconnecting the battery Disconnect the BLACK cable from the NEG- ATIVE (-) terminal first.

Then disconnect the RED cable from the POSITIVE (+) terminal. Mount the battery holder securely in a dry, well-ventilated, vibration-free loca- tion in the boat. Install a fully charged bat- tery in the holder. WARNING EMU29390 Checking top cowling Check the fitting of the top cowling by push- ing it with both hands. If it is loose have it re- paired by your Yamaha dealer. ECM01121 CAUTION: G Make sure the main switch (on applica- ble models) is “ ” (off) before work- 57