hyundai R510LC-7 — 5. RCV LEVER

CROSS SECTION The construction of the pilot valve is shown in the attached cross section drawing. The casing has vertical holes in which reducing valves are assembled. The pressure reducing section is composed of the spool(5), spring(7) for setting secondary pressure, return spring(10), stopper(9), spring seat(8) and shim(6). The spring for setting the secondary pressure has been generally so preset that the secondary pressure is 5 to 20.5 kgf/cm 2 (Depending on the type). The spool is pushed against the push rod(14) by the return spring. When the push rod is pushed down by tilting the handle, the spring seat comes down simultaneously and changes setting of the secondary pressure spring.

1 Case 2 Plug 3 Plug 4 O-ring 5 Spool 6 Shim 7 Spring 8 Spring seat 9 Stopper 10 Spring 11 Plug 12 Rod seal 13 O-ring 14 Push rod 15 Plate 16 Bushing 17 Joint assembly 18 Swash plate 19 Adjusting nut 20 Lock nut 21 O-ring 22 Handle connector 23 Nut 24 Insert 25 Boot 26 Handle 27 Switch assembly 28 Screw 29 Switch assembly 30 Switch cover 40 Boot 2-81