Case where pedal is tilted (2) 14 8 T P 1 2 14072SF75 2-92 When the push rod(14) is stroked, the spool(8) moves downwards. Then port P is connected with port 1, and the oil supplied from the pilot pump flows through port 1 to generate the pressure. When the pressure at port 1 increases to the value corresponding to the spring force set by tilting the handle, the hydraulic pressure force balances with the spring force. If the pressure at port 1 increases higher than the set pressure, port P is disconnected from port 1 and port T is connected with port 1. If it decreases lower than the set pressure, port P is connected with port 1 and port T is disconnected from port 1.
In this manner the secondary pressure is kept at the constant value. Besides, in some type, when the handle is tilted more than a certain angle, the upper end of the spool contacts with inside bottom of the push rod and the output pressure is left to be connected with port P.