(11) User mode switch This switch is to select the maximum power or user mode. U : Memorizing operators preferable power setting. Refer to the page 5-5 for details. M : Maximum power 1607A3CD21 (12) Auto deceleration switch This switch is used to actuate or cancel the auto deceleration function. When the switch actuated and all control levers and pedals are at neutral position, engine speed will be lowered automatically to save fuel consumption. 1607A3CD22 Light ON : Auto deceleration function is selected. Light OFF : a. Auto deceleration function is cancelled so that the engine speed increased to previous setting value. b. One touch decel function is available.
(13) Power mode switch The lamp of selected mode is turned ON by pressing the switch( ). H : High power work. S : Standard power work. 21073CD23 (14) Travel speed control switch This switch is to control the travel speed which is changed to high speed(Rabbit mark) by pressing the switch and low speed(Turtle mark) by pressing it again. 21073CD24 (15) Buzzer stop switch When the starting switch is turned ON first, normally the alarm buzzer sounds for 2 seconds during lamp check operation. The red lamp lights ON and the buzzer sounds when the machine has a problem. In this case, press this switch and buzzer stops, but the red lamp lights until the problem is cleared. 1607A3CD25 5-36