SECTION 6 TROUBLESHOOTING GROUP 1 BEFORE TROUBLESHOOTING 1. INTRODUCTION When a trouble is occurred in the machine, this section will help an operator to maintain the machine with easy. The trouble of machine is parted Hydraulic & Mechanical system, Electrical system and Mechatronics system. At each system part, an operator can check the machine according to the troubleshooting process diagram.
6-1 Hydraulic & GROUP 2 Mechanical part Troubles occur Electrical part GROUP 3 Mechatronics GROUP 4 part 2 digit HRDT (Machine) by Hyundai Fault codes displayed on monitor display 3 digit INSITE (Engine) by Cummins Hydraulic & GROUP 2 Mechanical part 3 digit INSITE by Cummins (Engine) If fault codes (2 or 3 digits) are displayed on the monitor, please contact Hyundai or Cummins.