16) MAIN PUMP DELIVERY PRESSURE (1) Preparation Stop the engine. Remove the top cover of the hydraulic tank oil supply port with a wrench. Push the pressure release button to bleed air. To measure the main pump pressure. Install a connector and pressure gauge assembly main pump gauge port as shown. Start the engine and check for oil leakage from the port. Keep the hydraulic oil temperature at 50 1 a 2 a 5 C. (2) Measurement Select the following switch positions. Mode selector : M mode Measure the main pump delivery pressure in the M mode(High idle). 36077MS03 (3) Evaluation The average measured pressure should meet the following specifications. Unit :
kgf / cm 2 7-19 Model Engine speed Standard Allowable limits Remarks R510LC-7 High ilde 45 5 -