hyundai R510LC-7 — 4. MAIN CONTROL VALVE

2) DISASSEMBLY The figure in ( ) shown after the part name in explanation sentence shows its number in the construction figures. (1) Place control valve on working bench. Disassemble the valve in a clean and dry environment and pay careful attention not to damage the sealing flange faces. (2) Main spool Loosen socket head bolts(63) and remove the lock cap(12, 80). Pull out O-ring(14) from valve housing. 45078MC07 Remove all spool(3~11) of subassembly itself from valve housing. Be careful not to be damaged while pulling out spools. Identify them with a tag to prevent from being mistaken at disassembly. 45078MC08 Spools sub assy(3, 4, 6, 7, 9, 10, 11). 45078MC10 8-38