Pull out O-ring(20). When disassemble the spool assembly, fix the spool with vise. On this occasion attach wood between vise blades to prevent the spool from damaging. Heat the outer race of spool with industrial drier and then loosen easily . (Temperature : 200~250 C) 45078MC14 (4) Arm1 regeneration spool assy(20) Loosen the plug(23) and pull out O- ring(79). 45078MC15 Disassemble spring(22), spring seat(21) and spool(20). 45078MC16 Pull out sleeve of hole inside at same time, disassemble sleeve and piston. 45078MC18 8-40