Remove brake piston(702) from casing (301). (9) 32038SM09 (10) Remove the cylinder(111) from the output shaft (101) with the motor positioned horizontally. Remove piston(121), retainer(123), spherical bushing(113), spacer (117) and shoe plate(124). If shoe plate would not removed easily, try again after procedure(14). (11) Remove friction plate(742) and separate plate(743) from casing(301). (12) Remove snap ring(437) with plier and remove the front cover(304) from casing(301). Front cover could be removed with sliding shaft if necessary. 32038SM12 8-48 32038SM10 32038SM11 32038SM11