3) ASSEMBLY Do the reassembly in the reverse procedure of the disassembly. Place the casing(301) on the workbench with the valve casing(303) downward. (1) 32038SM20 (2) When reassembling the roller bearing, install the snap ring(432), and spacer(106) to the drive shaft(101). Insert the collar and cone of the roller bearing(443). Install the spacer(106) and snap ring(432). Install snap ring(433) to the output shaft (101) by heating the cone of the roller bearing(444). Out put 32038SM21 Roundring parts of the collar toward spacer Spacer 32038SM22 (3) Insert the drive shaft(101) into the casing (301) with the end of output shaft upward and tap the outer race of roller bearing with the hammer.
8-51 32038SM23