hyundai R510LC-7 — 5. SWING DEVICE

(5) Remove stop ring(28) and then sun gear1 (27). 28 27 19 21078SR005 (6) Tighten two M10 eye bolts to carrier1(19) and lift up and remove carrier1(19) as subassembly. 19 21078SR006 (7) Disassembling carrier1(19) assembly. Remove stop ring(38). Remove side plate2(39), planet gear1 (24), needle cage(22), side plate1(20) and side plate3(26) from the carrier. Using M8 solid drill, crush spring pin(17) so that the pin1(21) can be removed by hammering. Remove side plate3(26) from carrier1(19). Do not reuse spring pin(17). Do not remove pin1(21), carrier1(19) and spring pin(17) but in case of replace- ment. Put matching marks on the planet gear1 (24) and the pin1(21) for easy reassembly.

26 38 39 22 24 20 17 21 19 21078SR007 8-60