hyundai R510LC-7 — 5. SWING DEVICE

2) 2) DISASSEMBLY DISASSEMBLY (1) Spread off the 4 corners of lock washer (35) with a tool. Do not reuse lock washer (35). Loosen the bolts (34) and then remove lock washer (35) and lock plate (33) from the pinion gear (29). Remove pinion gear (29) and spacer (30) from the drive shaft (2). Remove cover plate (31) from the casing (1) by loosening the hexagon bolts (32). 2 35 34 33 29 ц 30 32 31 1 48098SR01 (2) Remove gauge bar and gauge pipe from the swing motor casing. Pour the gear oil out of reduction gear into the clean bowl to check out the friction decrease. Gauge bar ц Gauge pipe 21078SR02 (3) Loosen the socket bolts (36) to separate swing motor from reduction gear.

36 48098SR02 (4) Tighten 3 M16 eye bolts to the ring gear (25) and then lift the ring gear (25) out of the casing (1). 25 1 48098SR03 8-84