hyundai R510LC-7 — 5. SWING DEVICE

(8) Remove sun gear2 (22). 18 48098SR07 (9) Remove carrier2 (6) assembly from casing (1). 6 1 48098SR08 (10) Disassembling carrier 2 (6) assembly Using M8 solid drill, crush spring pin (13) so that the pin & bushing (10) can be removed. Do not reuse spring pin (13). Remove pin & bushing (10), planet gear 2 (8) and bushing 2 (11) from the carrier 2 (9). Put matching marks on the planet gear 2 (8) and the pin & bushing (10) for easy reassembly. Do not disassemble pin & bushing (10), carrier 2 (6) and spring pin (13) but in case of replacement. Η 6 13 ц Θ 10 8 11 ц 48098SR09 ц (11) Remove thrust plate (27) and stop ring (28) from the drive shaft (2). 27 28 2 48098SR10 8-86