(13) Apply loctite to the tapped holes of the ring gear (25) and then mount swing motor onto the ring gear (25). Don't fail to coincide the gauge bar (42) hole. ц (14) Tighten socket bolts (36) around the swing motor assembly. В Tightening torque : 24 kgf В m (173 lbf В ft ) 36 48098SR26 Assemble plugs (37, 38). (15) 37 1 37 38 48098SR27 (16) Turn the swing motor assembly upside down and assemble cover plate (31) by tightening the hexagon bolts (32). Install spacer (30) and pinion gear (29) to the drive shaft (2). Assemble lock plate (33) on the pinion gear (29).
Assemble 2 lock washers (35) on the lock plate (33) with their 2 hole coincided individually to the tapped holes of drive shaft (2). Tighten hexagon bolts (34) to the drive shaft (2) and then fold all the lock washer (35) corners over the hexagon bolts (34). В Tightening torque : 24 kgf В m (173 lbf В ft ) 2 35 34 33 29 30 32 31 1 48098SR28 (17) Inject oil into the reduction gear. 8-91