(12) Insert spring pin (127) into pin holes of carrier 3 (120). ц Mate pin of carrier 3 (120) with center of shaft bearing. (13) Assemble angular bearing (105) to hub (102). (14) Assemble angular bearing (105) in other side of hub (102). (15) Assemble hub (102) into ring gear (114) then tighten socket bolt (107) to specified torque to fix hub. ц Tightening torque Socket bolt (107) : 50.3 kgf В m ( 364 lbf В ft) 8-113 480H8TM61 480H8TM62 480H8TM63 480H8TM64