hyundai R510LC-7 — 7. RCV LEVER

GROUP 7 RCV LEVER 1. REMOVAL AND INSTALL 1) REMOVAL (1) Lower the work equipment to the ground and stop the engine. (2) Operate the control levers and pedals several times to release the remaining pressure in the hydraulic piping. (3) Loosen the breather slowly to release the pressure inside the hydraulic tank. Escaping fluid under pressure can penetrate the skin causing serious injury. 13031GE18 1 (4) Loosen the socket bolt(1). 2 (5) Remove the cover of the console box. (6) Disconnect pilot line hoses(3). 3 (7) Remove the pilot valve assembly(2). When removing the pilot valve assembly, check that all the hoses have been disconnected.

21078DA06 2) INSTALL (1) Carry out installation in the reverse order to removal. (2) Confirm the hydraulic oil level and check the hydraulic oil leak or not. 8-128