3) DISASSEMBLY (1) Clean pilot valve with kerosene. Put blind plugs into all ports (2) Fix pilot valve in a vise with copper(or lead) sheets. (3) Remove end of boot(25) from case(1) and take it out upwards. 1408DA62 For valve with switch, remove cord also through hole of casing. 1408DA63 (4) Loosen lock nut(20) and adjusting nut(19) with spanners on them respectively, and take out handle section as one body. 1408DA64 Remove the boot(40) (5) 1408DA61 8-132