(12) For disassembling reducing valve section, stand it vertically with spool(5) bottom placed on flat workbench. Push down spring seat(8) and remove two pieces of semicircular stopper(9) with tip of small minus screwdriver. Pay attention not to damage spool surface. Record original position of spring seat(8, 31). Do not push down spring seat more than 6 mm . 36078RL09 Separate spool(5), spring seat(8), spring(7) and shim(6) individually. Until being assembled, they should be handled as one subassembly group. (13) 36078RL10 Take push rod(14) out of plug(11). (14) 36078RL11 Remove O-ring(13) and seal(12) from plug(11). Use small minus screwdriver or so on to remove this seal.
(15) 36078RL12 8-135