hyundai R510LC-7 — 7. RCV LEVER

(17) Cleaning of parts Put all parts in rough cleaning vessel filled with kerosene and clean them (Rough cleaning). If dirty part is cleaned with kerosene just after putting it in vessel, it may be damaged. Leave it in kerosene for a while to loosen dust and dirty oil. If this kerosene is polluted, parts will be damaged and functions of reassembled valve will be degraded. Therefore, control cleanliness of kerosene fully. Put parts in final cleaning vessel filled with kerosene, turning it slowly to clean them even to their insides(Finish cleaning). Do not dry parts with compressed air, since they will be damaged and/or rusted by dust and moisture in air. (18) Rust prevention of parts.

Apply rust-preventives to all parts. If left as they after being cleaned, they will be rusted and will not display their functions fully after being reassembled. 8-137