hyundai R510LC-7 — 7. RCV LEVER

(9) When return spring is strong in force, assemble 4 sets at the same time, utilizing plate(15), and tighten joint(17) temporarily. 36078RL23 Fit plate(15). (10) Tighten joint(17) with the specified torque to casing, utilizing jig. (11) 36078RL24 (12) Assemble swash plate(18) to joint(17). Screw it to position that it contacts with 4 push rods evenly. Do not screw it over. 36078RL25 (13) Assemble adjusting nut(19), apply spanner to width across flat of plate(18) to fix it, and tighten adjusting nut to the specified torque. During tightening, do not change position of disk. 36078RL26 8-140