hyundai R510LC-7 — 9. BOOM, ARM AND BUCKET CYLINDERS

Note that the plated surface of rod assembly(2) is to be lifted. For this reason, do not use a wire sling and others that may damage it, but use a strong cloth belt or a rope. Place the removed rod assembly on a wooden V-block that is set level. Cover a V-block with soft rag. Rod assembly Wooden block 36078CY22A (2) Remove piston and cylinder head Remove screw(21) and lock nut(20). Remove piston assembly(14), back up ring(16), and O-ring(15). Remove the cylinder head assembly from rod assembly(2). If it is too heavy to move, move it by striking the flanged part of cylinder head with a plastic hammer. Pull it straight with cylinder head assembly lifted with a crane.

Exercise care so as not to damage the lip of rod bushing(4) and packing (6, 7, 8, 9, 10) by the threads of rod assembly(2). Plastic hammer Lift with a crane Pull straight 36078CY22C 8-159 13 14 15 1 6 20 21 50078CY02