(3) Assembly Before assembly, clean the parts. Coat the sliding surfaces of all parts with oil. Cool up bushing(2) fully by some dry ice and press it into shell(1). Do not press it at the normal temperature, or not knock in with a hammer even after the cooling. 1 2 Press 8-167(1) 210-7 Coat O-ring(4) with grease thinly, and install it to shaft(3). Insert shaft(3) into bracket(6) and drive in the spring pin(7). 4 3 6 7 8-167(2) 210-7 Install seal(5) to shell(1) and bracket(6). 5 8-167(3) 210-7 Install shaft(3) to shell(1). 3 1 8-167(4) 210-7 8-171